 |
 |
|
|
||||
 |
|
|
||||
|
 |
||
Retirement Sale: Save An Additional 20% Off of Our Normal Discount Price
|
||
|
||
|
|
|
 |
||
 |
 |
|
 |
|
|
|
||
| Overview • Decoder Families • Warranty |
|
|
|
|
|||
| N-scale Decoders | |||
|
|||
| Drop-In Decoders | Hard-Wire Decoders | ||
| Amperage:
1.3-Amp Motor, 2-Amp Stall, 2-Amp Peak Silent Running Kick Start for the Resident Speed Curve and the User-Loadable Speed Table V-Start, V-Mid, and V-Max in All speed-step modes Two- and Four-Digit Addressing Speed Steps; 28 and 128 Momentum: Acceleration and Deceleration Base-Direction Programming User Identifiers User-Loadable Speed Table Decoder-Assisted Consisting DAC Function Control DAC Momentum Trim DC Analog Conversion Two 100mA Functions for LEDs; 40mA for Incandescent Lamps Function Remapping Full-Wave (Blue Common) Wiring Directional/Non-Directional Lighting FX Lighting |
N12A0 N12A0e N12A1 NIMFTA NIMFTB |
Amperage:
1-Amp Motor, 1.25-Amp Stall, 1.25-Amp Peak Silent Running Kick Start for the Resident Speed Curve and the User-Loadable Speed Table V-Start, V-Mid, and V-Max in All speed-step modes Two- and Four-Digit Addressing Speed Steps; 28 and 128 Momentum: Acceleration and Deceleration Base-Direction Programming User Identifiers User-Loadable Speed Table Decoder-Assisted Consisting DAC Function Control DAC Momentum Trim DC Analog Conversion Two or Four 100mA Functions for LEDs; 40mA for Incandescent Lamps Function Remapping Full-Wave (Blue Common) Wiring Directional/Non-Directional Lighting FX Lighting |
|
|
|||
| HO-Scale Decoders | |||
|
|||
| D13SR Decoders | D13SRJ Decoders | ||
| 1.56" long, 0.63"
wide, 0.125" thick at the connector 1.3-amp motor driver with 2-amp peak Four 100 mA Functions (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
1.62" long, 0.63"
wide, 0.165" thick at the connector, 0.125" thick elsewhere JST connector 1.3-amp motor driver with 2-amp peak Four 100 mA Functions (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
||
| D15SR Decoders | Direct Plug-In HO-Scale Decoders | ||
| 1.1" long, 0.63"
wide, 0.325" thick JST connector 1.3-amp motor driver with 2-amp peak Five 100 mA Functions (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
1.3-amp motor driver with 2-amp peak Three 100 mA Functions (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
D14SRP P2K-SR |
|
| Drop-In Decoders | mp motor driver
with 2-amp peak Three 100 mA Functions (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
||
| Drop-in installation for specific locos 1.3-amp motor driver with 2-amp peak Four 100 mA Functions (DA-SR), three 100 mA Functions (SW9-SR); (40 mA for incandescent lamps) Special lighting effects Decoder-Assisted Consisting Silent Drive ... and more |
ATLS4 DA-SR SW9-SR |
||
|
|||
| O-Scale Decoders | |||
|
|||
| O-Scale Decoders | |||
| Designed to be plug-n-play for Atlas O locomotives , some Weaver, and other locomotives. | ATLO D408E |
||
|
|||
| G-Scale Decoders | |||
|
|||
| G-Scale Decoders | |||
| 4- to 8-amp
motor driver with 10- to 30-amp peak Five to eight functions Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming |
D408E D408SR D808 |
||
|
|
NCE
decoders are fully factory tested and warranted against manufacturing
defects for a period of 1 year. As the circumstances under which this
decoder is installed cannot be controlled, failure of the decoder due
to installation problems cannot be warranted. This includes misuse,
miswiring, operation under loads beyond the design range of the decoder
or short circuits in the locomotive manufacturer's factory wiring. If
the decoder fails for non-warranted reasons NCE will replace the decoder,
no questions asked, for $10 U.S. ($25 for the D408SR) plus $2 shipping.
For warranty or non-warranty replacement send the decoder (and any payment,
if required) to:
NCE Warranty Center |
