About Loy's Toys
Retirement Sale
D408E O- and G-Scale Locomotive Decoder
DCC Compatibility
 
 

Retirement Sale: Save An Additional 20% Off of Our Normal Discount Price
On Most Items - Excluded Items are Highlighted in Orange

Click here for the list of remaining items.

Where applicable, our site now includes links to products available from our recommended dealers.

rwb
QSI QARC (Quantum Analog Remote Control) Warning
Click here to skip to decoder features.
RWB Line
The D408E decoder is designed for the higher amperage needs of G scale and Hi-rail O- and S-Scale locos.
NCE-D408E
O- and G-Scale Decoder
  • 2.3" long, 1.2" wide, 0.375" thick, with wires to cut and solder for installation
  • Fits the following locomotives:
    This decoder is NOT warranted for use in USA Trains or Charles Ro G-Scale locos. Other than that, this decoder is for hard-wiring to any loco it will fit into.
Photo unavaillable.
D408E  Features:
Amperage: 4 amps continuous, 12 amps stall, 12 amps peak
Silent Running
Kick Start for the resident speed curve and User-Loadable Speed Table
V-Start, V-Mid, and V-Max in all speed-step modes
Two- and Four-Digit addressing
Speed Steps: 28 and 128
Momentum: Acceleration and Deceleration
Back-EMF control
Base-Direction Programming
User Identifiers
User-Loadable Speed Table
Decoder-Assisted Consisting
DAC Function Control
DAC Momentum Trim
DC Analog Conversion
Seven 100 mA Functions; 40 mA for incandescent lamps
Function Remapping
Full-Wave (Blue Common) Wiring
Directional/non-directional lighting
FX lighting (requires programming CVs greater than 100)

Mars light
Rotary beacon
Gyralite
Double-pulse strobe
Strobe A/B
Rule 17 dimmable headlight (dims when Function 4 or Function 8 is turned on)
Directional Dimming
Blinking Ditch Lights (on w/ Function 2 [the horn button] on)
Alternate Ditch light scheme
Service-Mode Programming, all forms
OPS-Mode Programming
D408E  Decoders Do Not Have:
Headlight control in 14 speed-step mode with some older systems
JST connector harness system
Trim: Forward and Reverse
DC Function Control
Power-Source Conversion (CV12) - it has automatic analog instead
Packet Time-Out
CV Reset
Dither
Transponding
Short-Circuit Protection
Thermal protection
Switching Speed
OPS-Mode Read-Back

Refer to the Decoder Feature Index page for information about any decoder feature.
Loy's Toys Home Page Entire Site Copyright © 2007 Loy's Toys
All rights reserved.		 Last Revised
Friday, November 23, 2007 11:52 PM		 Loy's Toys Home Page
This site is best viewed with Firefox 1.4/Internet Explorer 5.0 / Netscape 6.0 or higher and at 800x600 resolution or higher.
Search Engine Submission & Optimization