|
When installing track
feeders, the most tedious and difficult part is stripping the track
power bus wire. This tool changes all that. Simply place the jaws
of this tool on the wire and squeeze.
Other tools can only strip insulation off the end of a wire, or they
have a circular cutting edges for specific wire size. This tool has
jaws that grip the insulation and pulls it apart, anywhere on the
wire, regardless of wire size, down to about 20AWG. Better yet, after
soldering, you can even pull the insulation back to the solder joint
so no excess wire is left exposed.
NOTE: This stripper is
NOT for decoder wire. |
