Where applicable, our site now includes links to products available from our recommended dealers.
NMRA
2x4 Socket Harness/ CON-2x4h
NMRA
Socket with 6-Inch Wires
This harness is for hard-wiring a loco
that doesn't have an NMRA socket so you can use a decoder
that has an NMRA plug.
Note: If you're using
a decoder that has a JST harness/connector, this is not
needed. When you hard-wire the JST harness to the loco,
the decoder can still be unplugged at the JST connector.
This Con-2x4 is only needed if you're using an integral/direct
plug decoder, or a decoder that has wires soldered directly
to the decoder board.
