 |
 |
|
|
||||
 |
|
|
||||
|
 |
||
Retirement Sale: Save An Additional 20% Off of Our Normal Discount Price
|
||
|
||
|
|
|
 |
| Decoder Selection • Decoder Installation • Sound Equipment Selection • Installation Service |
|
This engine
is designed for a special "not so"Drop-in decoder. The Digitrax
DN122K2 is a three-piece decoder that's all connected together with
wires. While this decoder is designed to be "sort of" a
drop in for this loco, it isn't nearly as easy as most. |
 |
|
|
 |
|
|
|
|
|
|
 |
 |
| Decoder Selection |
|
| The only decoder made specifically for this engine is the Digitrax DN122K2. However, you can hard wire a regular wired decoder if you want to, but there is no advantage - so they're not listed below. For more about this decoder, refer to the decoder section. |
|
 |
 |
 |
 |
||
| DN122K2/ D-DN122K2 |
3-Piece Decoder Connected by Wires |  |
 |
SOLD OUT | |
| $44.99 | 1-4 | $36.00 | |||
| 5+ mixed |
$33.00 | ||||
|
| Shipping & Handling is $3.50 for the first decoder, 50¢ for each additional decoder up to a $7.50 maximum. When ordered with other items, S&H is 10% with a $3.50 minimum and $7.50 maximum. |
 |
| Decoder Installation |
|
|
| Sound Equipment Selection |
|
There is no sound decoder made for this engine. I suppose if one wanted sound one could hard-wire a sound unit of choice and small oval speaker in the passenger cabin. The Micro sound units are the smallest and would be easiest to fit in. Neither the speaker nor enclosure is included with any of these decoders. Remember, the most important part of the installation is building a proper enclosure for the speaker. |
|
|
|
|
|
|
| 140068/ TU-Y |
Owner's Manual for all LC Sound Decoders | |
|
|
| . | $5.00* | |||
|
| * Manuals with the price marked with an asterisk (*) are free when ordered on the same invoice with the related sound decoder. All manuals are available free for the downloading from the Throttle Up! (SoundTraxx) web site. |
|
| Sound Equipment Selection: Speakers |
|
|
|
|
|
|
| LS-112 | Micro Oval Speaker | |
|
SOLD OUT |
| . | $8.00 | |||
|
| Shipping & Handling is $5.00 for a sound decoder and speaker alone. If ordered with other items S&H is $7.50 for everything. |
|
| Installation Service |
|
Installation is available from Larry Eyman at Papa's Trains; you may send a message to him at lareyman@hotmail.com |
