|
The UT-2 is a LocoNet
Throttle, designed to operate on existing Digitrax LocoNet systems
(DT200, DCS100 or Computer Control). This throttle can acquire &
run one locomotive or consist (even the ones with four-digit addresses).
The user can control speed, direction, & functions for these units.
By pressing Run/Stop, the user can stop the unit he is running but
will not stop the whole layout.
- 128 speed step operation! You can select 14,
28, or 128 speed step operation for each individual Digitrax or
other compatible DCC decoder when you program it so you don't
have to sacrifice performance if you have some decoders that have
128 speed steps and some that don't.
- LED indicators, selection knobs and large speed
control knob show throttle status at a glance and make operation
easy. The large speed control knob gives incredibly fine speed
control. When you select a loco, if the speed control knob position
does not match the loco's actual speed, the LED indicators will
flash to let you know that you need to match the speed control
knob to the actual loco speed before you lock on to that loco.
- Capable of controlling Dispatched UniVersal
or Basic Consists
- Control F0, F1, F2 & F3 from the keypad.
These functions can be used for lighting, sound, etc.
Set up for easy access to 2 digit addresses 00-98. Address 99
is set up so that you can use it to select locomotives with 4
digit addresses. This gives you access to all 2-digit and 4-digit
DCC decoder addresses.
- Operates without a battery. Because of this,
it will not work on LocoNet systems using stereo jacks as plug
ins.
- The UT-2 has programming capabilities that give
you access to CV's 01-90. You can program address, start mid &
max voltage, loadable speed tables, accel, decel, FX effects and
much more.
|
