Terminal
strip board with resistors installed is used for solderless connection
of your signals to Digitrax's Signal cabling. This Terminal Strip plugs
onto the Signaling Cable, and your signal wires are then connected via
the screw terminals on the strip. Note that this item is NOT used in
conjunction with the D-SMBK base. The D-TSMK is used instead of the
D-SMBK base if you're nervous about soldering your signal wires to the
SMBK.
Two of these Terminal Strips
come in each package, allowing you to wire two signal masts (four 3-aspect
signal heads).
|
