 |
 |
|
|
||||
 |
|
|
||||
|
 |
||
Retirement Sale: Save An Additional 20% Off of Our Normal Discount Price
|
||
|
||
|
|
|
 |
||
 |
 |
|
 |
|
|
|
| Z/N-scale Decoders | |||
|
|
|
|
| DZ143 Decoders | Z-Scale Drop-In Decoders | ||
| 0.36" wide, 0.55" long,
0.13" thick 1.25-amp motor driver with 2-amp peak Can be used in other scales Four 500 mA Functions Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming Back-EMF Control Transponding |
Drop-in installation in various locos 1-amp motor driver with 2- amp peak 500 mA Functions. Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming Transponding Other features not listed above |
|
|
| DN163 Decoders | N-scale Drop-In Decoders | ||
| Six 500 mA Functions ... and more Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming OPS-Mode Read-Back SuperSonic Drive Torque Compensation |
Drop-in installation in various locos Most have 1-amp motor driver with 2- amp peak Most have four 200 mA Functions. The Series 3 decoders have six 500 mA Functions. Most have special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming Some have Back-EMF Control Some have Transponding They all have features not listed above |
DN122K2 |
|
|
|||
| HO-Scale Decoders | |||
|
|||
| DH123D Decoders | DH163D Decoders | ||
| JST harness system Two 500 mA Functions ... and more Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming OPS-Mode Read-Back SuperSonic Drive Torque Compensation |
JST harness system Six 500 mA Functions ... and more Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming OPS-Mode Read-Back SuperSonic Drive Torque Compensation |
||
| HO-Scale Drop-In Decoders | |||
| Drop-in installation for specific Atlas, Kato,
Stewart, and Athearn Genesis locomotives 1.5-amp motor driver with 2-amp peak Six 500 mA Functions Special (FX) lighting Decoder-Assisted-Consisting OPS-Mode Programming |
|||
| Socket for SFX004 sound decoder | |||
|
|||
| O/G-Scale Decoders | |||
|
|||
| O/G-Scale Decoders | |||
| 3.5- to 5-amp motor driver with 2- to 8-amp peak Five 200 mA Functions Three 1-amp functions Special (FX) lighting effects Decoder-Assisted-Consisting OPS-Mode Programming |
DG383AR DG583AR DG583S |
||
|
|||
| Transponder/Function Decoders | |||
|
|||
| Transponder/Function Decoders | |||
| 0.44" long, 0.32" wide, 0.167"
thick (our measurements) Two- and Four-Digit addressing Use as Transponder only Use as Function only decoder Use as Transponder and Function decoder Limited FX features Limited function remapping Service-Mode Programming |
TL1 TF4 |
||
|
| Digitrax
Warranty and Repair Information (found in the back of their decoder manual) |
|
| Digitrax
fully tests every decoder we ship to be sure that you receive
reliable products. Because we want you to be comfortable installing
your own decoders, we recommend that you use a decoder tester
to check each decoder prior to installation. This lets you be
sure the decoder is working properly without worry about decoder
damage due to locomotive problems. If your decoder fails to pass
the decoder test, we will replace it free of charge to you. Because
we can't control the actual decoder installation we can't cover
your decoder once you have tested it and started the installation.
In the event that you damage a decoder, we will repair or replace
it for US $17 if you return the decoder to us [Digitrax]. This
includes shipping the decoder back to you at a U.S. address. For
decoders that are shipped to addresses in Canada, the charge is
US $18. For decoders shipped to Europe the charge is US $20. For
decoders shipped to all other countries the charge is US $23.
All Digitrax decoders are fully repairable.
All warranties on Digitrax products are limited to refund of purchase price or repair or replacement of Digitrax products at the sole discretion of Digitrax. In the event that Digitrax products are not installed or used in accordance with the manufacturer's specifications, any and all warranties either expressed or implied are void. Except to the extent expressly stated in this section, there are no warranties, express or implied, including but not limited to any warranties of merchantability or fitness for a particular purpose. Digitrax, Inc. reserves the right to make changes in design and specifications, and/or to make additions or improvements in its products without imposing any obligations upon itself to install these changes, additions or improvements on products previously manufactured. Contact Digitrax for any questions or clarification. |
