Retirement Sale: Save An Additional 20% Off of Our Normal Discount Price
On Most Items - Excluded Items are Highlighted in Orange

Click here for the list of remaining items.

Where applicable, our site now includes links to products available from our recommended dealers.

With your Windows-compatible computer interfaced to Digitrax's LocoNet with an MS100, WinLok turns your computer into a sophisticated throttle capable of controlling many trains at one time. If using a Chief, it can also program locos via the Chief's programming track.

DigiToys posts updates for WinLok users to download free of charge. This keeps your software up to date as new features become available, such as Transponding support.

Interfacing your computer to LocoNet requires an MS100. The MS100 plugs directly into your computer's DB25 serial port (COM1 or COM2). The MS100 is then connected to LocoNet via a standard six-wire phone cable.

If your computer's available serial port is a DB9, then you'll need an adapter. There are two genders of adapters that will plug on - only one will work: the one that will provide the same pin-out as if your serial port were a DB25. We offer two styles of the type that works: the CPA (2 inches long) and the CPJ (1 foot long.

• Create on-screen CTC style track diagrams (entire layout or sectional) with buttons and indicator lights.
• On-screen recreation of train control devices such as cab controllers.
• Joystick support of cab controllers.
• Point to switch or button to set turnouts, signals and complete routing commands with point and click.
• Control of up to 9999 locos, 2048 switches, and 2048 sensors with the Chief, 128 locos, 128 turnouts and 2048 sensors.
• Automate block sections and hidden yards.
• Easy on-screen one-step decoder programming feature for the Chief and Lenz Digital Plus.
• Supports manual, semi-automated and/or fully automated operation of your layout.
• Extended locomotive program functions, accelerate and breaking factors, direction memory after power up of layout.
• MUing up to ten engines with same controller
• Programmable solenoid and route allocation on switchboard and memory.
• Programmable time delays and default settings for solenoid devices.
• Timetable programming.
• Sound board support to play WAV files from timetable.
• Automated operations possible simultaneous with manual operations.
• Support of parallel (8255-based) interface cards for faster communications with sensor modules.
• Quantity of devices used is limited only by the memory of the computer.
• Internal support of up to 255 speed settings and 16 functions
• CTC support complete with Integrated CTC panel library

An IBM-compatible PC with the following minimum configuration:

• 80386 processor
• 4 MB RAM
• Hard Disk with 4 MB available space
• Mouse
• Microsoft Windows 3.1 or better. See note above.
• Available port* to connect to the command control system

  * For Digitrax, to connect an MS100 interface, a DB25 serial port or DB9 serial port with DB25 adapter.

• Digitrax
• Lenz Digital Plus
• Arnold Digital
• Marklin
• Trix Selectrix
• Fleischman FMZ
• Zimo
• Horn
• Wangro System One
• Direct Drive